BMW's F9X M8 is the brand's halo performance vehicle. If the rest of your build reflects that standard, your mirror covers should too. These AutoTecknic Replacement Dry Carbon Mirror Covers are built in pre-preg dry carbon fiber: formed in a mold, autoclave-cured under vacuum, and finished with a 2x2 twill weave. At 110 grams per side, they are significantly lighter than the OEM plastic originals with no change in fitment or mounting behavior.
These are direct OEM replacement covers. They use the same mounting clips as the factory parts and install without modification. Available in left-hand drive and right-hand drive configurations for the F91 Convertible, F92 Coupe, and F93 Gran Coupe. Select your chassis and drive configuration from the variant dropdown.
What's Included
One pair of dry carbon mirror covers (driver side and passenger side)
Key Features
100% pre-preg dry carbon fiber, autoclave-cured
2x2 twill weave with gloss clear coat finish
Approximately 110 grams per side, significantly lighter than OEM plastic
Direct OEM replacement: uses factory mounting clips, no modification required
Available in LHD and RHD configurations
Designed and assembled in the USA
Vehicle Fitment
Select your chassis and drive configuration from the variant dropdown:
BMW F91 M8 Convertible (2020-2024): LHD and RHD
BMW F92 M8 Coupe (2020-2024): LHD and RHD
BMW F93 M8 Gran Coupe (2020-2024): LHD and RHD
Installation Notes
Plug-and-play replacement using the OEM clip system. No drilling or adhesive required.
Remove the OEM mirror cover by carefully unclipping it from the mirror housing.
Align the dry carbon cover with the mounting clip positions and press firmly into place.
Confirm the cover is fully seated and flush with the mirror housing on both sides.
